 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| v00.1203 MICROWAVE CORPORATION HMC340LP5 Features Conversion Loss: 8.0 dB LO/RF Isolation: 45 dB LO/IF Isolation: 33 dB Input IP3: +20 dBm Conversion Gain Balance: 0.1 dB GaAs MMIC SMT DOUBLE-BALANCED DUAL MIXER, 1.7 - 4.5 GHz Typical Applications The HMC340LP5 Dual Mixer is ideal for: * Wireless Infrastructure * Wireless Local Loop * Image Reject Mixer * I/Q Modulator * SSB Modulator 5 x 5 x 1 mm QFN SMT Package Functional Diagram General Description The HMC340LP5 is a double-balanced dual mixer covering 1.7 - 4.5 GHz RF/LO range. This passive MMIC mixer is constructed of GaAs Schottky diodes and on-chip baluns. The device can be used as an upconverter, downconverter, biphase (de)modulator, or phase comparator. The mixer symmetry of the HMC340LP5 makes it an ideal candidate for single sideband or image rejection applications. The consistent MMIC performance will improve system operation and assure regulatory compliance. A low cost, leadless 5x5 mm QFN surface mount package (LP5) houses the dual MMIC mixer IC. 12 MIXERS - SMT Electrical Specifications, TA = +25 C, As a Function of LO Drive Parameter Min. Frequency Range, RF & LO Frequency Range, IF Conversion Loss Conversion Gain Amplitude Balance Noise Figure (SSB) LO to RF Isolation LO to IF Isolation IP3 (Input) 1 dB Gain Compression (Input) 30 25 Typ. 1.7 - 4.5 DC - 1.5 8 0.10 8 45 33 20 12 10 0.25 10 40 33 LO = +13 dBm IF = 100 MHz Max. Min. Typ. 3.4 - 3.8 DC - 1.5 8 0.10 8 47 38 23 13 10 0.25 10 Max. GHz GHz dB dB dB dB dB dBm dBm Units * Unless otherwise noted, all measurements performed as single channel downconverter. 12 - 160 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v00.1203 MICROWAVE CORPORATION HMC340LP5 GaAs MMIC SMT DOUBLE-BALANCED DUAL MIXER,1.7 - 4.5 GHz Single Channel: Conversion Gain vs. Temperature @ LO = +13 dBm 0 Single Channel: Isolation @ LO = +13 dBm 0 RF TO IF LO TO RF LO TO IF CONVERSION GAIN (dB) -5 ISOLATION (dB) +25C +85C -40C -15 -10 -30 -15 -45 -20 1 1.5 2 2.5 3 3.5 4 4.5 5 RF FREQUENCY (GHz) -60 1 1.5 2 2.5 3 3.5 4 4.5 5 FREQUENCY (GHz) 12 MIXERS - SMT Single Channel: Conversion Gain vs. LO Drive 0 Single Channel: Return Loss @ LO = +13 dBm 0 CONVERSION GAIN (dB) RETURN LOSS (dB) -5 -5 -10 -10 -15 LO= +9dBm LO= +11dBm LO= +13dBm LO= +15dBm -15 LO RF -20 1 1.5 2 2.5 3 3.5 4 4.5 5 RF FREQUENCY (GHz) -20 1 1.5 2 2.5 3 3.5 4 4.5 5 FREQUENCY (GHz) Single Channel: IF Bandwidth @ LO = +13 dBm 0 Single Channel: Input P1dB vs. Temperature @ LO = +13 dBm 15 14 INPUT P1dB (dBm) -5 RESPONSE (dB) 13 12 11 10 9 +25C +85C -40C -10 -15 RETURN LOSS CONVERSION GAIN -20 0 0.5 1 1.5 IF FREQUENCY (GHz) 2 8 1 1.5 2 2.5 3 3.5 4 4.5 5 RF FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 12 - 161 v00.1203 MICROWAVE CORPORATION HMC340LP5 GaAs MMIC SMT DOUBLE-BALANCED DUAL MIXER,1.7 - 4.5 GHz Single Channel: Input IP3 vs. LO Drive 30 Single Channel: Input IP3 vs. Temperature @ LO = +13 dBm 30 INPUT IP3 (dBm) 20 INPUT IP3 (dBm) 25 25 20 +25C LO= +11dBm 15 LO= +13dBm LO= +15dBm 15 +85C -40C 12 MIXERS - SMT 10 1.5 2 2.5 3 3.5 4 4.5 5 10 1.5 2 2.5 3 3.5 4 4.5 5 RF FREQUENCY (GHz) RF FREQUENCY (GHz) Single Channel: Input IP2 vs. LO Drive 70 65 60 INPUT IP2 (dBm) Single Channel: Input IP2 vs. Temperature @ LO = +13 dBm 60 55 INPUT IP2 (dBm) 50 45 40 35 30 1.5 +25C +85C -40C 55 50 45 40 35 30 1.5 LO= +11dBm LO= +13dBm LO= +15dBm 2 2.5 3 3.5 4 4.5 5 2 2.5 3 3.5 4 4.5 5 RF FREQUENCY (GHz) RF FREQUENCY (GHz) Single Channel: Upconverter Conversion Gain vs. LO Drive 0 Single Channel: Upconverter IP3 vs. LO Drive 30 CONVERSION GAIN (dB) -5 INPUT IP3 (dBm) 25 20 -10 15 LO= +11dBm LO= +13dBm LO= +15dBm -15 LO= +9dBm LO= +11dBm LO= +13dBm LO= +15dBm 10 -20 1.5 2 2.5 3 3.5 4 4.5 5 5 1.5 2 2.5 3 3.5 4 4.5 5 RF FREQUENCY (GHz) RF FREQUENCY (GHz) 12 - 162 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v00.1203 MICROWAVE CORPORATION HMC340LP5 GaAs MMIC SMT DOUBLE-BALANCED DUAL MIXER,1.7 - 4.5 GHz Dual Channel: Conversion Gain Amplitude Balance 1 0.75 AMPLITUDE BALANCE (dB) 0.5 0.25 0 -0.25 -0.5 -0.75 -1 1.5 2 2.5 3 3.5 4 FREQUENCY (GHz) 4.5 5 ISOLATION (dB) Dual Channel: Channel to Channel Isolation -60 -65 -70 -75 -80 -85 -90 -95 -100 1.5 RF1 TO IF2 RF2 TO IF1 2 2.5 3 3.5 4 4.5 5 RF FREQUENCY (GHz) 12 MIXERS - SMT Dual Channel: LO1 to LO2 Isolation -20 Dual Channel: RF1 to RF2 Isolation -20 -30 ISOLATION (dB) ISOLATION (dB) 2 2.5 3 3.5 4 4.5 5 -30 -40 -40 -50 -50 -60 -60 -70 1.5 -70 1.5 2 2.5 3 3.5 4 4.5 5 LO FREQUENCY (GHz) RF FREQUENCY (GHz) Dual Channel: IF1 to IF2 Isolation -20 -30 -40 ISOLATION (dB) -50 -60 -70 -80 -90 -100 0 0.5 1 IF FREQUENCY (GHz) 1.5 2 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 12 - 163 v00.1203 MICROWAVE CORPORATION HMC340LP5 GaAs MMIC SMT DOUBLE-BALANCED DUAL MIXER,1.7 - 4.5 GHz Harmonics of LO LO Freq. (GHz) 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 nLO Spur at RF Port 1 46 41 46 55 50 43 37 33 2 33 28 29 36 44 48 54 53 3 66 53 47 57 57 57 64 69 4 58 64 69 76 74 65 78 81 mRF 0 1 2 3 4 0 xx 15 75 76 76 1 8 0 68 76 77 MxN Spurious Outputs nLO 2 22 47 75 77 76 3 22 42 69 73 76 4 39 39 71 77 76 RF = 3.5 GHz @ -10 dBm LO = 3.6 GHz @ +13 dBm All values in dBc below IF power level 12 MIXERS - SMT LO = +13 dBm Values in dBc below input LO level measured at RF Port. Absolute Maximum Ratings RF / IF Input LO Drive Channel Temperature Continuous Pdiss (T = 85C) (derate 16.55 mW/C above 85C) Thermal Resistance (RTH) (junction to package base) Storage Temperature Operating Temperature +13 dBm +27 dBm 150C 1.07 W 60.4 C/W -65 to +150 C -40 to +85 deg C Outline Drawing NOTES: 1. MATERIAL PACKAGE BODY: LOW STRESS INJECTION MOLDED PLASTIC SILICA AND SILICON IMPREGNATED. 2. LEAD AND GROUND PADDLE MATERIAL: COPPER ALLOY 3. LEAD AND GROUND PADDLE PLATING: Sn/Pb SOLDER 4. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 5. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 6. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM. PAD BURR HEIGHT SHALL BE 0.25mm MAXIMUM. 7. PACKAGE WARP SHALL NOT EXCEED 0.05mm. 8. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 12 - 164 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v00.1203 MICROWAVE CORPORATION HMC340LP5 GaAs MMIC SMT DOUBLE-BALANCED DUAL MIXER,1.7 - 4.5 GHz Pin Descriptions Pin Number 1, 2, 4, 5, 7-11, 13-18, 20, 21, 23-28, 30-32 Function Description No Connection. These pins may be connected to RF ground without affecting performance. Interface Schematic N/C 3, 6 LO1, LO2 LO Port: This pin is DC coupled and matched to 50 Ohm from 1.7 to 4.5 GHz. 12 12, 29 IF2, IF1 19, 22 RF2, RF1 RF Port: This pin is DC coupled and matched to 50 Ohm from 1.7 to 4.5 GHz. Package Bottom GND Package bottom must be connect to RF/DC ground. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 12 - 165 MIXERS - SMT IF Port: This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose values has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/sink more than 4mA of current or die non-function and possible die failure will result. v00.1203 MICROWAVE CORPORATION HMC340LP5 GaAs MMIC SMT DOUBLE-BALANCED DUAL MIXER,1.7 - 4.5 GHz Application Circuit for use as an I/Q Modulator 12 MIXERS - SMT Application Circuit for use as an IRM Mixer 12 - 166 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com v00.1203 MICROWAVE CORPORATION HMC340LP5 GaAs MMIC SMT DOUBLE-BALANCED DUAL MIXER,1.7 - 4.5 GHz Evaluation PCB 12 MIXERS - SMT List of Material Item J1 - J6 U1 PCB* Description PC Mount SMA RF Connector HMC340LP5 Dual Mixer 107467 Evaluation Board * Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of VIA holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 12 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order Online at www.hittite.com 12 - 167 |
Price & Availability of HMC340LP5
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |